Distinction between Mine Vibrating Screen and Dewatering Screen

Similarities between Vibrating Screen and Dewatering Screen

1. Vibration motor or vibration exciter can be installed in mine vibration screen and dehydration screen (one of two choices).

2. The material and mesh size of sieve plate can be selected for both mine vibrating sieve and dewatering sieve.

3. The installation mode of vibration source is the same.

Differences between Vibrating Screen and Dewatering Screen

1. The inclination angle of mine vibrating screen is positive, and that of dehydrating screen is zero or negative.

2. The vibration frequencies of dehydration screen and mine vibration screen are different.

Problems and Solutions in Production Line of Mine Vibrating Screen and Dehydrating Screen

Mining vibrating screen is also a common equipment in all walks of life, but according to the production situation and material properties of different walks of life, there will be many production problems, the same machine, other customers use very well, another customer will have many problems, that is, material characteristics. How to solve the problems, Xinxiang Yihe Machinery Technology to serve you:

1. Fine mesh is easily damaged:

This problem is also a common problem. Many customers have a headache because they change the screen mesh. Most of the materials used in mine vibrating screen are larger or heavier. This is also a good solution. The screen mesh orifice plate is replaced by thick wire diameter, or the material of the screen plate is thickened. Dehydration screen is troublesome, dehydration screen mesh requirements are less than light. Therefore, the screen production technology problems, as long as the regular inspection, do a good job of maintenance.

2. Material cannot be discharged automatically.

Unable to automatically arrange material is a question that many customers ask by telephone at the beginning. Vibrating and dehydrating screens for mining use are powered by vibration motors or vibration exciters. Generally, they are two vibration motors or vibration exciters in parallel chains. If the phenomenon of non-automatic discharge occurs, it is simple to adjust the wire head of the input power of the mine vibrating screen and dehydrating screen.